Thin bonded wheels for cutting steel and stainless on handheld and stationary machines
Thin Klingspor Kronenflex wheels for cutting steel, stainless steel and other metals on angle grinders, plus railway wheels for petrol-driven cut-off machines. Never use a cutting-off wheel for side grinding.
Each wheel's label is colour-coded for the material it cuts and marked with its maximum speed, from general-purpose Extra to high-performance Special wheels.
General-purpose cutting-off wheel for metalworking. Cuts solid material fast.
Cutting-off wheel formulated for steel that also works on stainless steel, with good cutting performance.
Very fast cutting-off wheel for railway rails, with blotter. For petrol-driven cutting-off machines with a clamping device, at a cutting speed of 100 m/s.
High-performance cutting-off wheel with an extremely long service life and minimal burr formation.
Cutting-off wheel with a very good price-to-performance ratio. Minimal burr formation and low thermal load.
High-performance cutting-off wheel for stainless steel, steel and NF metals, with low thermal load and minimal burr formation.
High-performance cutting-off wheel, free of iron, sulphur and chlorine. Very short cutting times, minimal burr formation and low thermal load.
Premium cutting-off wheel with optimised bonding for a considerably longer service life. Free of iron, sulphur and chlorine.
Premium cutting-off wheel for very fast, precise and clean cuts. Free of iron, sulphur and chlorine.
Very fast cutting-off wheel for all rail types. For petrol-driven cutting-off machines with a clamping device, at a cutting speed of 100 m/s.
Cutting-off wheel for tough, hard materials such as titanium and high-alloy steels. Self-sharpening zirconia alumina grain gives short cutting times and long service life.